I have been making the "Seaborn" style trap net anchor for net fisherman around the Great Lakes since 2002
Do you or any of your marine clients require 60 pound trap net anchors?

My Anchors are forged from a single piece of 1.5" diameter steel with no welds to break and each fluke end has a supporting central rib for strength. I believe these to be the best anchor on the market. Can be made with sand drag plates across bends for high current or sandy bottom use.

50% deposit required for all orders.

$150 each for less than 50
$142.50 for 50 to 99
$135 for orders over 100

60 pound trap net anchor
1 1/2 inch solid steel
Forged flukes with raised rib support----no joints to break.
The nominal dimensions are:
45" tall
26" wide

I also make a 42# anchor for $135 ($121.50 each for order of 100 or more)
42 pound anchor forged from 1 1/4" diameter steel.
Dimensions (height, width) are roughly the same as the larger anchor.

If you require a specific size or ends for special bottom conditions then let me know or send a sample and 

I will match those dimensions.


Made to order in any quantity and custom sizes.
150 anchors on pallets 5_1